TM10-3930-660-34 6-7. CAB WIRING HARNESS - REPLACE/REPAIR This task covers: a. Removal b. Inspection c. Installation Initial Setup Tools Materials/Parts Tool Kit,  Automotive Mechanics Lockwashers (12),  (13),  (15),  (18) Shop Equipment,  Automotive Maintenance and Repair,  Common #1 Less Power Equipment Condition Negative Battery Cable disconnected,  TM10-3939-660-20. REMOVAL NOTE Tag all electrical leads as removed for use during installation. 1. UNPLUG FORTY-FOUR FEMALE CONNECTORS (2) FROM MALE CONNECTORS (1). 2. DISCONNECT WIRES FROM SIX LAMP HOLDERS (3). 3. DISCONNECT EIGHTEEN CONNECTORS (4), TWENTY-SEVEN CONNECTORS (5), CONNECTOR (6), SIX CONNECTORS (7), THIRTY-FOUR CONNECTORS (8) AND ELEVEN CONNECTORS (9) FROM DEVICES INDICATED. 4.    DISCONNECT TWO CONNECTORS (10) FROM STEER SELECT VALVE. 6. REMOVE CABLE CLAMPS (19-21) AND 5. REMOVE FOURTEEN NUTS (11) TEN DISCONNECT CONNECTORS (22-25). LOCKWASHERS (12) SIX LOCKWASHERS (13) NUT (14) LOCKWASHER (15), 7. CAREFULLY PUSH OUT TWO GROMMETS FIVE FLATWASHERS (16) TWELVE (26) AND GROMMET (27) FROM FRONT HARNESS SECTION (28). CLAMPS (17) AND FOUR LOCKWASHERS (18).  DISCARD LOCKWASHERS (12), 8. REMOVE FRONT HARNESS SECTION (28). (13) (15) AND (18). 6-24