TM10-3930-660-34 6-5. BOOM ELECTRICAL BOX ASSEMBLY - REPAIR This task covers: a.    Disassembly b.    Cleaning c.     Inspection d.    Assembly INITIAL SETUP Tools Materials/Parts Tool Kit, Automotive Mechanics Cable Ties (12) Grommet (14) Equipment Condition Grommets (15) Lockwashers (5,  17,  20) Vehicle parked on level surface and Tags (App.  B,  Item 52) forks lowered to ground. Negative battery cable disconnected, TM10-3930-660-20. DISASSEMBLY 1. REMOVE FOUR SCREWS (NOT SHOWN) AND ENCLOSURE COVER (1). 2. IF REQUIRED, REMOVE AUTOMATIC LEVELER CIRCUIT BOARD (2). a.    Tag and disconnect four wires connected circuit board (2) terminal strip (3). b. Remove four screws (4) and four lockwashers (5) from connector (6).  Connector is part of circuit board (2).  Discard lockwashers (5). c. Remove four nuts (7) and four screws (8) to remove circuit board (2). 6-19