TM10-3930-660-34 6-4.  STARTER - REPAIR This task covers: a.  Disassembly b.  Cleaning c.  Inspection d.  Assembly Initial Setup Tools Materials/Parts Tool Kit, Machinists: Post, Camp Gasket (27, 32) and Station Grommet (11) Lockwasher (31 and 38) Oil, Lubricating, Engine Equipment Condition (App. B, Item 26) Starter removed, TM10-3930-660-20. DISASSEMBLY 1.   CLAMP STARTER, DRIVE END DOWN, IN A VISE. 2.   REMOVE SCREW (1) TO DISCONNECT CONNECTOR (2) FROM SOLENOID SWITCH TERMINAL. 3.   REMOVE TWO THROUGH BOLTS (3) AND COIL END FRAME (4). 4.   IF NECESSARY FOR REPLACEMENT, REMOVE BEARING (5) AND WICK (6). 5.   REMOVE SCREW (7) AND CAREFULLY LIFT FIELD FRAME (8) AND ASSOCIATED PARTS OFF ARMATURE (9) AND DRIVE HOUSING (10). 6.   REMOVE PARTS FROM FIELD FRAME (8). a.  Remove connector (2) and grommet (11). b.  Remove two pins (12) to free holders (13 and 14) and springs (15) from supports (16). 6-11