TM10-3930-660-34 4-7.  FUEL/HYDRAULIC TANK - REPLACE/REPAIR (Cont’d) ASSEMBLY 1.   INSTALL ITEMS (38 THROUGH 44) AS APPLICABLE. 2.   INSTALL HYDRAULIC FILLER ASSEMBLY AND TOP COVER. a.  Use new gasket (37) and new lockwashers (35). b.  Tighten 14 nuts (34) in even increments to final torque, to prevent distortion of cover (36). c.  If items (31, 32 and 33) were removed, install new gaskets (32). d.  Attach chain of filler cap/breather using one screw (29). 3.   INSTALL FUEL TANK FILLER COMPONENTS. a.  Use new gasket (28). b.  Tighten six nuts (25) in even increments to final torque. 4.   INSTALL NEW GASKET (21) AND FUEL LEVEL SENDER (20).  SECURE WITH FIVE SCREWS (18) AND NEW LOCKWASHERS (19). INSTALLATION 1.   LIFT TANK ASSEMBLY INTO PLACE ON VEHICLE AND ENGAGE MOUNTING STUDS. 2.   INSTALL FOUR NEW LOCKWASHERS (17) AND NUTS (16).  DISCONNECT HOISTING SLING. 4-27