TM 10-3930-660-34 3-16. ROCKER ARM ASSEMBLY - REPLACE/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning d. Inspection e. Assembly f. Installation Initial Setup Tools Materials/Parts Tool Kit,  Automotive Mechanics Engine Lubricating Oil (App.  B,  Item 26) Tool Kit,  Machinists: Post,  Camp and Station Tool Kit,  Automotive Maintenance Common $2 Less Power Inside/Outside Micrometer Equipment Condition Rocker arm covers removed, TM 10-3930-660-20. Negative battery cable disconnected, TM 10-3930-660-20. REMOVAL 1. REMOVE ROCKER ARM ASSEMBLY (5). NOTE Tag or mark rocker arm assemblies, to include push rods,  so assemblies can be installed into the same position from which they were removed. a. Loosen two adjusting screw nuts (1). b. Loosen two adjusting screws (2). c. Remove capscrew (3) and capscrew (4), and remove rocker arm assembly (5). d. Repeat STEPS a through c for the other five rocker arm assembly sets (5). 2. REMOVE 12 PUSH RODS (6). 3-105