TM 10-3930-660-34 3-12. FLYWHEEL - REPLACE (Cont’d) 2. INSTALL FLYWHEEL HOUSING COVER (4) AND COUPLING (7). a. Apply Loctite #242 to threads of capscrews (5). b. Install 10 inch coupling (7), new lockwashers (6),  and capscrews    (5). Torque to 25 lb. ft. and let set for 24 hours before operating engine. c. Install flywheel housing cover (4), ether start thermostat ground wire (3), and six new lockwashers (2) and capscrews (1). 3. INSTALL STARTING MOTOR, TM 10-3930-660-20. 4.   INSTALL ENGINE,  PARA 3-3. 3-89