INSPECTION INSTRUCTIONS - CONTINUED
Machine tooled parts. Inspect for cracks, breaks, elongated holes, wear and chips. Replace any damaged parts.
Machined surfaces. Inspect for cracks, evidence of wear, galled or pitted surface, burrs, nicks and scratches.
Mated surfaces. Inspect for remains of old gasket, seal, secure fit, pitting and evidence of leakage.
Rusted surfaces. Inspect for pitting, holes and severe damage.
Oil bathed internal parts. Inspect for cracks, nicks, burrs, evidence of overheating and wear.
Air actuated internal parts. Inspect for cracks, nicks, burrs, evidence of overheating and wear.
Externally exposed parts. Inspect for breaks, cracks, rust damage and wear.
Springs. Inspect for broken, collapsed and twisted coils.
END OF WORK PACKAGE