FORK SIDESHIFT CYLINDERS MAINTENANCE - CONTINUED
ASSEMBLY - CONTINUED
Solvent cleaning compound, MIL-PRF-680 Type III is an environmentally compliant and low toxic mate-
rial. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in well-ven-
tilated areas. Keep away from open flames and other sources of ignition.
Use cleaning solvent to clean threads of inner gland (2) and outer gland (4). Apply loctite.
Clean threads inside barrel (5). Slide outer piston (7) with cylinder (6) as an assembly, into barrel (5).
Install outer gland (4) into barrel (5). Tighten outer
gland (4) until it is flush with end of barrel. Do not
overtighten outer gland (4).
Use care when installing rod and piston
assembly. Keep rod in line with barrel to
Slide inner piston (3) on rod (1) into barrel (5). Use a
spanner wrench to tighten inner gland (2) until it is
flush with end of barrel (5).
Install fork sideshift cylinder (WP 0200 00).
Operate forks, check for leaks and proper operation (TM 10-3930-660-10).
END OF WORK PACKAGE