 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
MLRS ATTACHMENT CYLINDER REPAIR - CONTINUED
0308 00
DISASSEMBLY - CONTINUED
CAUTION
Do not nick or scratch seal groove during removal of seal. Failure to follow this precaution will cause part
damage.
9.
Cut seal (13) and discard.
NOTE
Nut may need to be heated with a torch for removal.
10.
Remove nut (14), washer (15) and piston (16).
11.
Remove and discard O-ring (17) from piston (16) bore.
12.
Remove washer (18) and gland (9) off rod (8).
13.
Remove O-ring (11) and back-up ring (19) from gland (9). Discard O-ring and back-up ring.
14.
Remove lock pellet (20) if necessary.
18
11
19
20
CAUTION
9
21
22
Do not nick or scratch seal groove during
removal of seal and rod wiper. Failure to
follow this precaution will cause part dam-
age.
23
NOTE
8
Note direction that lip seal is facing before
24
removal.
15.
Remove seal (21) and rod wiper (22) from inside of
23
gland (9). Discard seal.
16.
Use snap ring pliers to remove one snap ring (23) from
409-1471
bushing (24).
17.
Press out bushing (24) from rod (8). Remove other snap ring (23) from bushing (24). Discard bushing.
CLEANING
See Cleaning instructions (WP 0316 00).
INSPECTION
See Inspection instructions (WP 0317 00).
0308 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals