TURBOCHARGER ASSEMBLY REPAIR (165 HP) - CONTINUED
ASSEMBLY - CONTINUED
When installing impeller ensure balance marks on shaft and wheel and impeller. Failure to do so could
cause premature component failure.
Do not move bearing housing when installing impeller. Moving bearing housing during impeller instal-
lation will cause improper balance and premature component failure.
Install impeller (18) on turbocharger shaft and wheel (19).
Do not allow impeller to turn when installing locknut. Failure to prevent impeller from turning will result in
improper balance and premature component failure.
Locknut has left-hand threads, be sure to turn locknut counterclockwise when installing.
Install locknut (20) on turbocharger haft and wheel
(19). Torque locknut to 150 lb-in. (203 Nm).