 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
VALVE TAPPETS MAINTENANCE - CONTINUED
0279 00
MEASUREMENT
1.
Measure tappet bores. If tappet bores in cylinder block are not within specified tolerance, the engine must be rebuilt.
Wear Limit Tolerance
0.630 to 0.632 in. (16 to 16.05 mm)
409-1013
2.
Check tappet dimensions (D) minimum diameter = 0.627 in. (16 mm).
3.
Check tappet diameter in four places: 1.65 in. (42 mm)
from face, 0.51 in. (13 mm) from face and 90 degrees
to each measurement.
D
409-1014
4.
Install valve tappets (WP 0217 00).
END OF WORK PACKAGE
0279 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals