BOOM ASSEMBLY REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Be careful that lines and electrical cable on underside of outer boom section are not damaged when boom
assembly is lowered onto supports.
Carefully remove boom assembly (8) from vehicle frame and lower boom assembly (8) onto supports.
Remove tensioner (20) from boom assembly.
Remove and discard two tie wraps from rubber hoses as necessary.
Remove four nuts (21), tensioner (20), two rubber hoses (22), threaded studs (23), springs (24) and spring retainers (25)
from bracket of outer boom.
Install two spring retainers (25), springs (24), threaded studs (23), rubber hoses (22) and tensioner (20) to bracket of
outer boom with four nuts (21).
Install two new tie down straps to secure rubber hoses (22) to threaded studs (23).