CARRIAGE ASSEMBLY REPLACEMENT - CONTINUED
At operating temperature, hydraulic oil is hot and under pressure. Hot oil can cause injuries. Allow hydraulic
oil to cool before disconnecting any hydraulic lines.
Wipe the area clean around all hydraulic connections to be opened during removal and disassembly. Cap oil
lines and plug holes after removing lines. Contamination of the hydraulic system could result in premature
Identify lines to ensure proper installation. Use container to catch any hydraulic oil that may drain from sys-
Tag and disconnect four hydraulic lines (1) from fork
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
Attach carriage assembly to a hoist through a sling.
Take up slack in lifting sling to allow hoist to support carriage assembly.