STEERING KNUCKLE MAINTENANCE - CONTINUED
ADJUSTMENT - CONTINUED
Remove upper and lower steering knuckle caps. Measure total current shim pack thickness (upper and lower shim packs
Subtract actual end play (value obtained in step 1) from total shim pack thickness obtained in step 7. Divide this result
Make new lower shim thickness the same value as calculated in step 8. If this thickness cannot be met exactly, choose
nearest thicker shim pack.
Make new upper shim thickness the same as value obtained in step 8, plus 0.005 in. (0.127 mm). If the result cannot be
met exactly, choose nearest thicker shim pack.
Operate vehicle and check for proper operation (TM 10-3930-660-10).
END OF WORK PACKAGE