 |
|||
|
|
|||
|
Page Title:
REAR DIFFERENTIAL CARRIER ASSEMBLY REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 10-3930-660-24-2
REAR DIFFERENTIAL CARRIER ASSEMBLY REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning, Inspection, Installation
INITIAL SETUP
Materials/Parts - Continued
Tools and Special Tools
Oil, lubricating (Item 32, WP 0323 00)
Tool kit, general mechanic's (Item 39, WP 0324 00)
Personnel Required
Shop equipment, automotive maintenance (Item 21,
Two
References
Lifting device, 4,000 lb capacity
Materials/Parts
Compound, prussian blue marking (Item 13, WP
Equipment Condition
Rear axle assembly removed (WP 0245 00)
Compound, sealing (Item 13, WP 0323 00)
Axle housing drained (WP 0125 00)
Rear planetary wheel ends removed (WP 0259 00)
Sealant, Loctite (Item 46, WP 0323 00)
REMOVAL
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
1.
Remove differential carrier (2) from axle housing (3).
2
3
2.
Carefully tip axle assembly so that rear differential
carrier (2) is up.
NOTE
4,5
Capscrews from differential carrier to axle
9
7,8
housing are of three different sizes. Note
6,8
size, location and quantity of capscrews
when removing for correct location during
replacement.
1
3.
Remove twelve capscrews (4), twelve flatwashers (5),
409-1282
two capscrews (6), two capscrews (7) and four flat-
washers (8) from differential carrier (2).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals