FRONT AXLE ASSEMBLY REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
Weight of axle assembly is 1,650 lb (748 kg).
With assistance, raise front of vehicle 8 in. (20.3 cm) off ground and support under frame.
Remove frame tilt cylinder (WP 0183 00).
Remove front disk brake assemblies (WP 0249 00).
Disconnect axle breather hose (3) from frame by
removing nut (4), lockwasher (5) and clamp (6). Dis-