FUEL/HYDRAULIC TANK MAINTENANCE - CONTINUED
REMOVAL - CONTINUED
Loosen two nuts (11).
Remove two nuts (12), lockwashers (13) and cap-
screws (14) attaching tank assembly (45) to support
bar (15). Discard lockwashers.
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
With assistance, connect a hoist or other suitable lift-
ing device to lifting eye (A) on top of tank assembly
Take up slack in lifting device and then remove four
nuts (16) and lockwashers (17). Discard lockwashers.
Lift tank assembly (45) away from vehicle frame.