FUEL SHUTOFF SOLENOID REPLACEMENT (165 HP)

TM 10-3930-660-24-2

FUEL SHUTOFF SOLENOID REPLACEMENT (165 HP)

0227 00

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

Equipment Condition

Tools and Special Tools

Tool kit, general mechanic's automotive (Item 39,

Vehicle parked on level ground (TM 10-3930-660-

10)

Engine off and cool (TM 10-3930-660-10)

Materials/Parts

Locknut (6)

Battery cables disconnected (WP 0107 00)

REMOVAL

NOTE

Cover of air cleaner, bracket of throttle cable and lever of fuel injection pump may be removed for easier

access to fuel shutoff solenoid.

Disconnect connector (1 or 2) of fuel shutoff solenoid (3 or 4) from connector (5) of engine wiring harness.

Remove locknut (6) and washer (7), if equipped, from threaded stud (8) of fuel injection pump (9). Discard locknut.

NOTE

Perform steps 3 and 4 if vehicle is equipped with original fuel shutoff solenoid which includes a sepa-

rate bracket.

If fuel shutoff solenoid is to be replaced by a new solenoid, DISCARD solenoid (3), two screws (10),

one of three screws (11) and bracket (12) when removed.

Remove two screws (10) and fuel shutoff solenoid (3) from bracket (12) and threaded stud (8).

Remove three screws (11) and bracket (12) from side of fuel injection pump (9).

409-4094

ORIGINAL DESIGN SOLENOID (WITH BRACKET)