 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
FUEL INJECTOR PUMP REPLACEMENT (152 HP) - CONTINUED
0224 00
INSTALLATION - CONTINUED
8.
Loosen screw (23) and insert timing lock plate (24)
under head of screw (23). Torque screw (23) to 120 lb-
in. (163 Nm).
24
23 409-1061
9.
Disengage TDC pin (22).
22
409-1059
10.
Torque nut (25) to 48 lb-ft (65 Nm).
11.
Install front cover (WP 0252 00).
12.
Install brace (21) and three capscrews (20). Leave cap-
17
screws (20) finger tight until certain that brace (21) is
14
16
18
13
properly positioned.
13.
In order, torque two brace-to-block capscrews (20)
and then one brace-to-pump flange capscrew to 6 lb-ft
(8 Nm).
15
14.
Tighten nuts (13).
15.
Connect electrical lead (18) to fuel shutoff valve, con-
nect fuel drain line (17), connect fuel supply line (16)
and connect six high fuel pressure lines (15) to fuel
19
injection pump (19).
409-1057
16.
Install STE/ICE-R pulse tachometer and drive.
0224 00-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals