TM 10-3930-660-24-2
OIL PAN MAINTENANCE - CONTINUED
0219 00
CLEANING
INSPECTION
INSTALLATION
1.
Coat both sides of new gasket (3) with sealant.
NOTE
Install special washers with concave side towards oil pan.
2.
Install new gasket (3) and oil pan (1) and secure with
thirty-six special washers (4) and capscrews (2).
3.
Torque capscrews (2) to 6 lb-ft (8 Nm).
3
4
2
1
409-1035
4.
Fill engine with oil (WP 0012 00).
5.
Connect battery cables (WP 0107 00).
6.
Run engine and check for proper operation and leaks (TM 10-3930-660-10).
END OF WORK PACKAGE
0219 00-2