FLYWHEEL HOUSING AND COVER MAINTENANCE - CONTINUED
INSTALLATION - CONTINUED
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
With assistance, attach lifting device and hoist to fly-
wheel housing (2) and lift housing into position on
Install eight capscrews (1). Torque capscrews to 57 lb-
ft (77 Nm) in the sequence shown.
Install oil pan (WP 0219 00).
Install flywheel (WP 0214 00).
Operate engine, check for leakage, excessive vibration and proper operation (TM 10-3930-660-10).
END OF WORK PACKAGE
0215 00-5/(-6 Blank)