FLYWHEEL HOUSING AND COVER MAINTENANCE - CONTINUED
INSTALLATION - CONTINUED
Always use the seal pilot to install rear seal. Failure to do so could result in damaged seal.
Ensure rear oil seal lip is clean to help prevent seal leaks.
Install new oil seal (8) with seal pilot onto crankshaft
Push new oil seal onto crank (B) and remove seal
Tap alignment and installation tool at the 12, 3, 6 and 9 o'clock positions only. Striking the tool at other loca-
tions could damage the seal carrier.
Place installation and alignment tool onto crankshaft
and against new oil seal (8) carrier.
Tap tool with a plastic hammer at the 12, 3, 6 and 9
o'clock positions to drive new oil seal (8) evenly into
position and to prevent damaging the seal carrier.
Drive new oil seal (8) into rear cover (5) until installa-
tion and alignment tool stops against the cover.
Remove installation and alignment tool from crank-