CYLINDER HEAD REPLACEMENT - CONTINUED
Lifting equipment used for lifting machine must be in good condition and of suitable load capacity. Failure
to follow this warning may cause injury or death, or damage to equipment.
The bottom surface of the cylinder head and top of cylinder block must be clean of all residue and dry. Dirty
surfaces could cause leaks or incorrect seat between the cylinder head and block.
Install new cylinder head gasket (7) over the cylinder
block dowels (8). Be sure gasket is correctly aligned
with holes in block.
Attach lifting chains and hoist to engine lifting brack-
ets. The cylinder head weighs approximately 114 lb
Carefully place cylinder head (6) over the block dow-
els (8) and onto block (9).