ENGINE LIFTING BRACKETS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning, Inspection, Installation
Tools and Special Tools
Tool kit, general mechanic's (Item 39, WP 0324 00)
Shop equipment, automotive maintenance (Item 21,
Sealant, Loctite (Item 45, WP 0323 00)
Thermostat removed (WP 0055 00)
"Front" and "rear" engine references used in this paragraph are relative to the front and rear of the vehicle,
with engine mounted in the vehicle. The fan side of the engine is designated the rear of the engine, and the
flywheel end of the engine is identified as the front of the engine.
With thermostat removed, remove engine rear lifting
Remove two capscrews (2) and front lifting bracket
See Cleaning instructions (WP 0316 00).
See Inspection instructions (WP 0317 00).
Apply loctite to capscrews as installed.
Install front lifting bracket (3) and two capscrews (2).
Torque capscrews (2) to 57 lb-ft (77 Nm).
Assemble engine rear lifting bracket (1) to engine,
then install thermostat (WP 0055 00).
END OF WORK PACKAGE