ENGINE ASSEMBLY REPLACEMENT (152 HP) - CONTINUED
REMOVAL - CONTINUED
There is one locknut, rebound washer, and capscrew attaching each front engine mount to the vehicle frame.
Remove locknut (64), rebound washer (65) and cap-
screw (66) from front left side and front right side of
engine mounts (67). Discard locknut.
Remove fan (WP 0059 00).
Remove locknut (68), rebound washer (69) and cap-
screw (70) from rear engine mount (71). Discard lock-
Use caution when handling heavy parts.
Provide adequate support and use assis-
tance during procedure. Ensure that any
lifting device used is in good condition
and of suitable load capacity. Keep clear of
heavy parts supported only by lifting
device. Failure to follow this warning may
cause injury or death.
Weight of engine assembly is approxi-
mately 1,075 lb (488 kg).