 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
PRIORITY VALVE REPLACEMENT - CONTINUED
0177 00
REMOVAL - CONTINUED
7.
Remove priority valve (4).
8.
If necessary, remove hydraulic bypass switch (1) from priority valve (4) (WP 0091 00).
INSTALLATION
NOTE
Remove caps and plugs as hoses are installed. Wipe all sealing surfaces on valve and hoses clean and dry.
1.
If removed, install hydraulic bypass switch (1) to valve (4) (WP 0091 00).
2.
Position valve (4) on mounting bracket.
3.
Install two bolts (7) through holes (8) on mounting bracket and push bolts through valve body.
4.
Place new lockwasher (6) on end of each bolt (7).
NOTE
Apply loctite to bolts as nuts are installed.
5.
Place nut (5) on end of each bolt (7). Tighten both nuts (5) to secure valve.
6.
Connect six hydraulic lines (2) at fittings (3) of priority valve (4).
7.
Connect electrical lead 10 to terminal of switch (1).
8.
Connect electrical lead 91 to other terminal of switch.
9.
Remove wheel chocks and check for proper operation (TM 10-3930-660-10).
END OF WORK PACKAGE
0177 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals