 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
HEATER TEMPERATURE CONTROL VALVE AND CABLE REPLACEMENT - CONTINUED
0169 00
REMOVAL - CONTINUED
3.
Remove clamps (4) securing heater hoses (5) to ends
of valve (2). Discard clamps.
2
5
4.
Remove hoses (5) from ends of valve (2).
5.
If necessary, remove electric joystick (WP 0077 00) to
provide access to nut (6).
5
6.
Remove nut (6) securing cable (1) to side console (7).
4
409-627
7.
Pull cable (1) out through hole in console (7).
INSTALLATION
1.
Push end of cable (1) through hole in side console (7)
1
and through center of nut (6).
2.
Push cable (1) through hole in cab floor above heater
6
temperature control valve (2).
NOTE
Apply loctite to threads of nut.
3.
Secure cable (1) to side console (7) with nut (6).
7
409-628
4.
If removed, install electric joystick (WP 0077 00).
5.
Position hoses (5) on ends of valve (2).
6.
Secure hoses (5) to valve (2) with new clamps (4).
7.
Position end of cable (1) on valve (2).
8.
Tighten setscrew (3) to secure cable (1) to valve (2).
2
9.
Fill engine cooling system with coolant (WP 0053 00).
3
1
409-630
END OF WORK PACKAGE
0169 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals