 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
PARKING BRAKE ASSEMBLY REPLACEMENT - CONTINUED
0127 00
INSTALLATION
1.
Install new seal (22).
2.
Install thrust washer (21).
3.
Install plate (18) and secure with eight capscrews (20).
4.
Install spacer (19).
5.
Install backing plate (17) to plate (18) and secure with four washers (16) and four capscrews (15).
6.
Install parking brake assembly lever (14).
7.
If removed, install two linings (12) with ten new rivets (13).
8.
Place two brake shoes (11) and linings (12) in position. Install two shoe return springs (10) in holes closest to backing
plate (17). Move lever (14), as needed, to facilitate shoe installation.
9.
Position drum (1) on flange (2).
10.
Secure drum (4) to flange (3) with six capscrews (7), six washers (8) and six nuts (9).
11.
Install pin (6) and new cotter pin (5). Set parking brake (TM 10-3930-660-10).
12.
Apply loctite to threaded area of differential pinion.
13.
Position flange (3) and drum (4) on parking brake assembly and secure with washer (2) and nut (1). Torque nut between
300 and 400 lb-ft (407 and 543 Nm).
14.
Install front propeller shaft (WP 0124 00).
15.
Place parking brake in ON position and remove wheel chocks.
END OF WORK PACKAGE
0127 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals