 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
AXLE ASSEMBLIES SERVICE
THIS WORK PACKAGE COVERS
Service
INITIAL SETUP
Materials/Parts
Tools and Special Tools
Oil, lubricating (Item 33, WP 0323 00)
Tool kit, general mechanic's (Item 39, WP 0324 00)
Lockwasher (5)
Shop equipment, common no. 1 (Item 20, WP 0324
Equipment Condition
Vehicle parked on level ground (TM 10-3930-660-
10)
SERVICE
NOTE
Service procedures for both front and rear axles are similar.
1.
To check oil level of axle (1), remove oil level check plug (2) from axle (1).
2.
Check that oil level is up to bottom of check plug hole.
If not, add oil as described in steps 3 thru 5, below.
3.
Slowly add new oil to axle (1) through check plug
hole until oil begins to flow back out of hole.
4.
Recheck oil level and add more oil, if necessary, until
oil level is up to bottom of check plug hole.
2
5.
Install oil level check plug (2) to axle (1). Front axle
shown, rear axle similar.
6.
If necessary, drain and refill axle (1) with oil.
1
3
409-484
7.
Place a suitable container under axle drain plug (3).
8.
Remove axle drain plug (3) from the bottom of axle (1) and allow oil to drain from axle (1) completely.
9.
Install axle drain plug (3) to axle (1).
10.
Add oil to axle (1) as described in steps 1 thru 5, above.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals