 |
|||
|
|
|||
|
Page Title:
ADJUSTMENT OF TRANSMISSION DISCONNECT PEDAL LINKAGE |
|
||
| ||||||||||
|
|
 TM 10-3930-660-24-1
TRANSMISSION DISCONNECT AND BRAKE PEDALS MAINTENANCE - CONTINUED
0116 00
ADJUSTMENT OF TRANSMISSION DISCONNECT PEDAL LINKAGE
2
1.
Remove cotter pin (17) and clevis pin (15) securing
9
clevis (13) to pedal arm (3). Discard cotter pin.
10
1
5
7
2.
Loosen jamnuts (36 and 37) on pushrod (35).
8
6
3.
Rotate pushrod pin (35) and/or clevis (13) in or out as
required until clevis pin (15) fits freely through holes
4
on clevis (13) and pedal arm (3).
4.
Secure clevis (13) to pedal arm (3) with clevis pin (15)
and new cotter pin (17).
5.
Tighten jamnuts (36 and 37).
3
15
17
13
36
37
35
409-457
ADJUSTMENT OF TRANSMISSION DISCONNECT SETTING
1.
With pedal arm (3) and pedal arm (4) in full up posi-
tion, check for a 0.06 in. (1.52 mm) gap between head
of capscrew (27) and pedal arm (3).
4
2.
If necessary, loosen nut (28) and adjust screw (27)
until proper gap is achieved. Tighten nut (28) after
making adjustment.
28
3
16
38
18
14
39
27
40
409-458
0116 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals