 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
ALTERNATOR AND ALTERNATOR PULLEY REPLACEMENT (152 HP) - CONTINUED
0062 00
REMOVAL - CONTINUED
9.
If necessary, remove nut (20), flatwasher (21), alterna-
tor pulley (11), baffle (22) and fan (23) from alternator
23
(4).
INSTALLATION
22
1.
If removed, position fan (23), baffle (22), and alterna-
11
tor pulley (11) on shaft of alternator (4) and secure
with flatwasher (21) and nut (20). Torque nut (20) to
21
70-80 lb-ft (95-108 Nm).
4
20
409-255
2.
If removed, position alternator brace (14) on engine and secure with capscrew (19). Torque capscrew to 32 lb-ft (43
Nm).
3.
If removed, position alternator support (17) on engine and secure with three capscrews (18). Torque capscrews to 6 lb-ft
(8 Nm).
4.
Secure alternator (4) to engine with mounting hardware.
5.
Align upper mounting holes of alternator (4) with alternator support (17) and secure with nut (16) and capscrew (15).
Torque nut and capscrew to 57 lb-ft (77 Nm).
NOTE
If necessary, loosen capscrew to permit alignment of lower mounting hole of alternator and alternator brace.
6.
Align lower mounting hole of alternator (4) with alternator brace (14) and secure with two new starwashers (13) and
capscrew (12). Torque capscrew to 60-70 lb-ft (81-95 Nm).
7.
If necessary, torque capscrew (19) to 32 lb-ft (43 Nm).
NOTE
Be sure drive belt is properly positioned around engine pulleys as noted during removal. Refer to WP 0061 00.
8.
Lift fan belt tensioner assembly (10) and install fan belt (9) on alternator pulley (11).
0062 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals