 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
HIGH PRESSURE FUEL HOSES AND TUBES REPLACEMENT (165 HP) - CONTINUED
0035 00
INSTALLATION
CAUTION
17
16
15
Fuel tubes are not interchangeable. To ensure
proper engine operation, connect fuel tubes to
fuel injectors and fuel injection pump ports as
noted during removal. Do not weld or substitute
13
7
fuel tubes or damage to equipment could result.
2
10
1.
Install two fuel tubes (2) in two inner brackets (17)
11
and two brackets (16) with screw (15).
2.
Install eight inner brackets (14) and four brackets (13)
on six fuel tubes (2) with four screws (12).
3.
Install four inner brackets (11), two brackets (7) and
11
two brackets (10) on six fuel tubes (2) with four
screws (9).
9
14
14
12
409-1765
TR00350
CAUTION
Fuel tubes must be clamped and routed so they do not contact each other or any other component during
engine operation, or damage to equipment could result.
4.
Position six fuel tubes (2) on engine (8) and install two
6
6
7
screws (6) in brackets (7). Torque screws to 6 lb-ft (8
Nm).
7
NOTE
Install, but do not fully tighten, nuts in step 5
below. Nuts will be fully tightened in step 6.
5.
Install six fuel tubes (2) on fuel injection pump (5)
with nuts (4).
6.
Position six fuel tubes (2) on fuel injectors (3) and
loosely install nuts (1). Using wrench and torque
wrench, torque nuts (4) to 18 lb-ft (24 Nm).
2
5
4
8
TR001764
409-349
0035 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals