Table 1. Unit Preventive Maintenance Checks and Services (PMCS) for 6K Forklift - Continued.

TM 10-3930-660-24-1

UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED

0011 00

Table 1. Unit Preventive Maintenance Checks and Services (PMCS) for 6K Forklift - Continued.

Location

Item To

Man-

Check/

Hours

Item No.

Interval

Procedure

Service

NOTE

Annual

Drain

Hydrau-

Forklift should be parked on level ground with transmission in

lic Oil

Neutral (N) and locked and parking brake applied. Retract

hydraulic cylinders and shut down engine.

Hydraulic oil capacity of fuel/hydraulic tank is 55 gal. (208 L).

a. Remove hydraulic oil tank filler cap.

b. Place container under hydraulic oil side of fuel/hydraulic tank.

c. Remove drain plug from bottom of fuel/hydraulic tank and allow

hydraulic oil and accumulated water and sediment to drain from tank.

d. Clean drain plug and reinstall.

e. Fill hydraulic tank with hydraulic oil (Item 33, WP 0323 00).

NOTE

Annual

Planetary

Hubs and

Forklift should be parked on level ground with transmission in

Differen-

Neutral (N) and locked, and park brake applied. Shut down

tials

engine.

Planetary hub capacity is 2.7 qt (2.6 L).

Differential capacity is 10.6 qt (10 L).

Clean area around plug before removing.

a. Position wheel with plug at bottom of axle at 6 o'clock position. Remove

plug and drain oil into suitable container. Dispose of oil in accordance

with local policy and ordinances.

b. Position forklift so that planetary hub drain/fill hole is at 3 or 9 o'clock.

c. Add oil (Item 33, WP 0323 00) to planetary hub until oil is level with

opening. Clean plug and reinstall.

d. Remove level/fill plug from differential. Remove drain plug and drain

oil. Clean drain plug and reinstall.

e. Add oil (Item 33, WP 0323 00) to differentials through level/fill hole

until oil is level with opening. Clean plug and reinstall.

Road Test Start forklift and road test. Operate all controls to ensure that forks, boom,

Annual

steering and frame tilt are operating normally. Listen and feel for any

abnormal noise or vibration. Ensure that engine, transmission and hydrau-

lic system all function and respond to controls smoothly.

0011 00-11