TM10-3930-660-20 18-7. MLRS  ATTACHMENT  CONTROL  VALVE  ASSEMBLY   - REPLACE (Cont'd) 7. IF NECESSARY, REMOVE FITTINGS FROM VALVE  . a. Remove four adapters (19) from valve. b. Remove two elbows (20) from valve. c. Remove four adapters (21) from valve. d. Remove adapter (22) from valve. INSTALLATION 1. 2. 3. IF REMOVED, INSTALL FITTINGS TO VALVE. a. Install b. Install valve. c. Install d. Install valve. adapter (22) to valve. four adapters (21) to two elbows (20) to valve. three adapters (19) to SECURE VALVE WITH MOUNTING HARDWARE. a. b. c. Position and support valve on vehicle. Apply Loctite 242 to two capscrews (18). Install two spacers (16), two capscrews (18) , two new lockwashers (15) and two nuts (17). Apply Loctite 242 to capscrew (14). Install spacer (16), new lockwasher (15) and capscrew (14). CONNECT AND SECURE EIGHT ELECTRICAL CONNECTORS TO VALVE AS TAGGED. Install gasket (13) on each electrical connector (11) before installing connector (12) to valve. 18-32