TM10-3930-660-20 17-6. MIRROR  -   REPLACE  (Cont’d) 2. 3. REMOVE MOUNTING HARDWARE AT BOTTOM OF MIRROR BRACKET (l). a. b. c. IF Support mirror assembly so it does not drop during removal of bottom mirror mounting hardware. Remove two locknuts (6), two flatwashers (7), and locking device (8). Remove mirror bracket (1) from vehicle bracket (9). NECESSARY,  REMOVE  VEHICLE  MOUNTING BRACKET (9) FROM VEHICLE. Remove two capscrews (10), two lockwashers (11), and two nuts (12). Discard lockwashers (11). 1. 2. IF REMOVED, INSTALL VEHICLE MOUNTING BRACKET (9) TO VEHICLE. Install two capscrews (10), two new lockwashers (11), and two nuts (12). INSTALL MOUNTING HARDWARE AT BOTTOM OF MIRROR BRACKET (1). a. Align mirror assembly on vehicle mounting bracket (9). Support mirror assembly so it does not drop during  installation  of  bottom mirror mounting hardware. 17-16