| |
TM10-3930-660-20
17-5.
WINDSHIELD WASHER ASSEMBLY - SERVICE/REPLACE (Cont’d)
4. INSTALL RESERVOIR ASSEMBLY (2) TO
SIDE CONSOLE (3).
Apply
(10).
a.
b.
Apply
Loctite 242 to threads of screws
Position reservoir assembly (2) on
side console (3) and secure with
four new lockwashers (11) and four
screws (10).
Push hose (9) on fitting at
bottom of reservoir assembly (2).
Loctite 242 to threads of
capscrew (6).
c.
d.
Secure electrical lead (8) to side
console (3) with two new
starwashers (7) and capscrew (6.
Connect female spade connector of
5.
6.
7.
electrical lead 14) to male spade
connector on resistor assembly (5)
as tagged.
FILL RESERVOIR ASSEMBLY (2) WITH
WASHER FLUID AS DESCRIBED IN SERVICE
SECTION OF THIS PARAGRAPH.
INSTALL ELECTRIC
8-19.
CONNECT NEGATIVE
PARA. 8-44.
JOYSTICK, PARA.
BATTERY CABLE,
17-14
|
