TM10-3930-660-20 17-5. WINDSHIELD  WASHER  ASSEMBLY   - SERVICE/REPLACE (Cont’d) Nuts (13) are accessed through in side console (3) created by of electric joystick. opening removal b. Remove two locknuts (13), two screws (14) and resistor assembly (5) from side console (3). Discard locknuts  (13). 3. REMOVE WASHER NOZZLE (15) FROM CAB (16). The washer nozzle (15) is located on the cab (16) below the base of the front windshield wiper. a. b. c. 4. IF Remove four capscrews (17) and dashboard access panel (18) from front  console  (19). From inside front console (19), pull and remove hose (9) from washer nozzle (15). Remove nut (20) and starwasher (21) from washer nozzle (15). From outside vehicle, remove washer nozzle (15) and rubber washer (22) from cab (19). Discard rubber  washer  (22). NECESSARY, REMOVE HOSE (9) FROM SIDE CONSOLE (3). Pull hose (9) out of side console (3) from hole at rear of side console (3). 17-12