TM10-3930-660-20 16-5. ENGINE DOOR PANELS - REPLACE (Cont’d) INSTALLATION 1. IF REMOVED, INSTALL  DOOR  LATCH 6 THROUGH 11) TO TOOL BOX DOOR (PARTS (1) . a. Secure handle (11) with lockwasher (10) and hex nut (9). Install jam nuts (7) so that latching lever (6) is properly positioned on shaft. Refer to measurement taken in step 2  of  installation. b. Install jam nut (7), lockwasher (8), latching lever (6), second lockwasher  (8), and second jam nut (7). Apply Loctite 242 to threads of capscrews (3). 2. POSITION ENGINE DOOR PANEL (1) ON HINGE (2) AND SECURE WITH THREE CAPSCREWS (3), (4), AND THREE THREE NEW  LOCKWASHERS NUTS  (5). 16-6