TM10-3930-660-20 16-5. ENGINE DOOR PANELS - REPLACE This task covers: a. Removal b. Installation Initial  Setup Tools Tool Kit, Automotive Mechanics Materials/Parts Lockwashers  (3) Loctite 242 (App. C, Item 39) Equipment  Condition Vehicle parked on level ground. NOTE Procedure can be used to remove right or left side engine door panels. 1. OPEN ENGINE DOOR PANEL (1) TO BE REMOVED  . Support engine door panel (1) so door does not drop when mounting hardware is removed. 2. REMOVE ENGINE DOOR PANEL (1) FROM HINGE (2) BY REMOVING THREE CAPSCREWS (3), THREE LOCKWASHERS (4), AND THREE NUTS  (5).   DISCARD LOCKWASHERS (4). 3. IF NECESSARY, REMOVE DOOR LATCH (PARTS 6 THROUGH 11). a. b. c. Measure position of latching lever (6) on shaft. Record measurement for reference during installation. Remove jam nut (7), lockwasher (8), latching lever (6), second lockwasher (8), and second jam nut (7)  . Remove hex nut (9), lockwasher (10), and handle (11). 16-5