TM10-3930-660-20 14-11. STEERING SELECT - VALVE RBPLACE/REPAIR   (Cont’d) Remove caps and plugs as hoses are installed. Wipe all sealing surfaces on valve and hoses clean and dry. Position valve (3) on vehicle as noted during removal. Note that nuts (5), lockwashers (6), and washers (7) are accessed from inside the cab  tool  box. Lockwashers (9) are located between valve (3) and backside of tool box. 1. 2. 3. 4. 5. INSTALL THE STEERING SELECT VALVE (3). a. b. Position valve (3) on vehicle. Secure with two lockwashers (9). two capscrews (8), two washers (7),  two  new  lockwashers  (6), and two nuts (5). CONNECT FOUR HYDRAuLIC HOSES (4) AS TAGGED  . CONNECT TWO ELECTRICAL LEADS (1) AT PLUGS (2) OF STEERING SELECT VALVE (3). Insert plugs (2) of two electrical leads (1) into two socket terminals of steering select valve (3) as tagged. CONNECT BATTERIES, PARA. 8-44. BLEED THE STEERING SYSTEM HYDRAULIC CIRCUIT BY SELECTING FOUR WHEEL STEERING AND CYCLING THE STEERING CYLINDERS FIVE TIMES. 14-26