| |
TM10-3930-660-20
14-5.
TIE ROD -
MUST (Cont’d)
f. Distatce (x) between marks on front
of tires should measure 0 to 1/8
in. less than distance (y) between
marks on rear of tires.
g. If toe-in specifications outlined
in step lf are not met, adjust tie
rod as described in step 2 of this
section.
2. IFNECESSARY,
PROPER TOE-IN
a. Loosen nut
clamps (3)
(1).
b.
c.
ADJUST TIE ROD (1) FOR
measurements .
and capscrew (2) at
on each end of tie rod
Turn tie rod (1) as required until
proper toe-in measurements are
achieved, as described in step lf
of adjustment.
Tighten nut and capscrew (2) at
clamps (3) on each end of tie rod
(1) to 50-65 lb. ft.
14-6
|
