TM10-3930-660-20 14-3. STEERING WHEEL - REPLACE This task covers: a. Removal b. Installation Initial Setup Tools Tool Kit, Automotive Mechanics Shop  Equipment,  Automotive Maintenance, Common #2 Less Power Puller, Steering Wheel Equipment  Condition Vehicle parked on level ground. 1. PRY OFF CAP (1) FROM CENTER OF STEERING WHEEL (2). 2. REMOVE NUT (3) SECURING STEERING WHEEL (2)  TO  STEERING  COLUMN  (4). PULL WHEEL (2) OFF STEERING COLUMN (4) 3. USING A PULLER INSTALLATION 1. POSITION STEERING WHEEL (2) ON STEERING COLUMN (4). 2. SECURE STEERING WHEEL (2) WITH NUT (3). TIGHTEN NUT TO 50 lb. ft. 3.   PUSH CAP (1) ONTO STEERING WHEEL (2). 14-2