| |
TM10-3930-660-20
12-5. SERVICE BRAKE SYSTEM - BLEEDING (Cont’d)
3.
BLEED BRAKE CALIPER (1).
a. Loosen each bleeder valve (2) and
(3) one full turn.
Do not release brake pedal until end of
step 3c.
b. Have an assistant depress brake
pedal slowly and steadily until
no air bubbles appear in oil
draining from bleeder valves (2)
and (3).
c. Tighten bottom bleeder valve (3)
and top bleeder valve (2). Have
assistant release brake pedal.
4.
REMOVE HOSES FROM BRAKE BLEEDER
VALVES (2) AND (3).
5.
STOP ENGINE.
6.
IF NECESSARY, REPEAT STEPS 1 THROUGH
5 AT OTHER BRAKE CALIPERS (1) ON
VEHICLE, AS REQUIRED.
7.
CHECK OIL LEVEL IN HYDRAULIC
RESERVOIR. ADD HYDRAULIC OIL,
IF NECESSARY, PARA. 5-10.
12-11
|
