TM10-3930-660-20 9-6. TRANSMISSION  DISCONNECT  MASTER  CYLINDER  ASSEMBLY -  REPLACE  (Cont’d) 4. 5. INSTALL CLEVIS PIN (5) AND NEW COTTER PIN (4) TO SECURE CLEVIS (6) TO PEDAL ARM (7). a. b. c. Rotate pushrod (13) and/or clevis (6) in or out as required until clevis pin (5) fits-freely through holes on clevis (6) and pedal arm (7). Secure clevis pin (5) to clevis (6) and pedal arm (7) with new cotter pin (4). Tighten jam nuts (12) and (14). CHECK  TRANSMISSION  DISCONNECT  SETTING AND ADJUST, IF NECESSARY. a. With pedal (7) and pedal (15) in full up position, check for a .06 inch gap between head of capscrew (16) and pedal arm (15). b. If necessary, loosen nut (17) and turn capscrew (16) until proper gap is  achieved. Tighten  nut  (17) after making adjustment. 9-16