M10-3930-660-20 8-44. BATTERY CABLES AND TERMINALS-  SERVICE/REPLACE (Cont’d) 9. TAG AND REMOVE POSITIVE BATTERY CABLE (11)  AND  THREE  ELECTRICAL  LEADS  (41) AT STARTING MOTOR SOLENOID  (42). 10. a. b. Remove nut (43), securinG positive battery cable (11), and three electrical leads (41), to terminal (44) on starting motor solenoid  (42). Tag and remove positive battery cable (11), and three electrical leads (41) at terminal (44). REMOVE POSITIVE BATTERY CABLE (11) FROM  VEHICLE. a. Under battery box (3) cut tie wrap (45) securing positive battery cable (11) to other electrical cables. Note routing of positive battery cable (11) on vehicle for use during installation. b. Pull cable (11) out of engine compartment and battery box from underneath vehicle. 8-119