TM10-3930-660-20 8-35. REAR TURN SIGNAL LIGHTS -  REPAIR/RBPLACE (Cont’d) c. Install new tie wrap (l). 3. CONNECT NEGATIVE BATTERY CABLE, PARA.  8-44. RBPAIR BY BULB REPLACEMENT 1. 2. 3. 4. 5. REMOVE  LENS. a.   Remove two nuts (10), and two lockwashers (11). Discard two lockwashers  (11). b. Pull lens (12) from socket plate (13). Remove two screws (14) from lens (12). REMOVE  BULB. a. Carefully push and twist the old bulb (16) counterclockwise until it releases from the socket. b. Remove and discard the old bulb (16). CAREFULLY PUSH AND TWIST THE NEW BULB (16) CLOCKWISE IN THE SOCKET UNTIL IT LOCKS  INTO  PLACE. INSTALL  LENS. a. Align lens (12) on socket plate (13). Slide  two  screws  (14) through holes on lens (12). b. Secure lens (12) with two new lockwashers (11) and nuts (10). CONNECT NEGATIVE BATTERY CABLE, PARA.  8-44. 8-94