| |
TM10-3930-660-20
8-28.
STE/ICB FUEL PRESSURE SENDER - REPLACE
This task covers:
a. Removal
b. Installation
Initial Setup
Tools
Tool Kit, Automotive Mechanics
Materials/Parts
Loctite 59241 (App. C, Item 42).
Equipment Condition
Vehicle parked on level ground.
Battery negative cable disconnected,
para. 8-44.
REMOVAL
1.
2.
3.
PULL AND REMOVE FEMALE PLUG (1) OF
VEHICLE WIRING HARNESS (2) FROM MALE
PLUG (3) OF FUEL PRESSURE SENDER (4).
UNSCREW SENDER (4), FROM TEE (5).
IF NECESSARY, REMOVE ADAPTER (6), TEE
(5), AND FLUID PASSAGE BOLT (7).
INSTALLATION
During step 1, apply Loctite 59241 to
threaded end of tee (5) that screws into
fluid passage bolt (7). Also apply
Loctite 59241 to threaded end of adapter
(6) that screws into tee (5).
2.
3.
4.
5.
APPLY LOCTITE 59241 TO THREADS
PRESSURE SENDER (4).
OF FUEL
SCREW SENDER (4) INTO TEE (5).
INSERT MALE PLUG (3) OF FUEL
PRESSURE SENDER (4) INTO FEMALE
PLUG (1) OF VEHICLE WIRING
HARNESS (2).
CONNECT NEGATIVE BATTERY CABLE, PARA.
8-44.
8-73
|
