TM10-3930-660-20 8-4. STARTING MOTOR - REPLACE This  task  covers: a.  Removal b. Installation Initial Setup Tools Materials/Parts Tool Kit, Automotive Mechanics Starwasher  (2) Starwasher  (12) Shop Equipment, Automotive Maintenance, Common #2 Less Power Equipment  Condition Vehicle parked on level ground. Negative battery cable disconnected, para.  8-44. Exhaust pipe removed, para. 6-4. The starting motor is accessed through the left-hand engine access door. REMOVAL 1. 2. REMOVE CAPSCREW (1), AND STARWASHER (2),  SECURING  ELECTRICAL  LEAD  (3), AND GROUND CABLE (4), TO STARTING MOTOR (5). TAG AND REMOVE ELECTRICAL LEAD (3), AND GROUND CABLE (4). DISCARD STARWASHER (2). TAG AND DISCONNECT POSITIVE ELECTRICAL CABLE (6), LEADS (7), AND LEADS (8), AT STARTING MOTOR SOLENOID (9). a. b. c. d. Remove nut (10), securing one cable (6), and three electrical leads (7), to terminal (a) on starting motor solenoid (9). Tag and remove cable (6), and electrical leads (7). Remove nut (11), and starwasher (12), securing two electrical leads (8), to terminal (b) of solenoid  (9). Tag and remove electrical leads (8). Discard starwasher (12). 8-7