TM1O-393O-66O-2O 8-3. ALTERNATOR  AND  ALTERNANTOR  PULLEY  -  REPLACE  (Cont’d) INSTALLATION 1. IF REMOVED, POSITION FAN (23), BAFFLE (22), AND ALTERNATOR PULLEY (11) ON SHAFT OF ALTERNATOR (4) AND SECURE WITH FLATWASHER (21) AND NUT (20). TORQUE NUT (20) TO BETWEEN 70 AND 80 LB. FT. 2.  IF  REMOVED),  POSITION  ALTERNATOR  BRACE (14) ON ENGINE AND SECURE WITH CAPSCREW (19). TORQUE CAPSCREW (19) TO 32 LB. FT. 3. IF REMOVED, POSITION ALTERNATOR SUPPORT (17) ON ENGINE AND SECURE WITH THREE CAPSCREWS (18). TORQUE CAPSCREWS (18) TO 216 LB. IN. 4. SECURE ALTERNATOR (4) TO ENGINE WITH MOUNTING HARDWARE. a. Align upper mounting holes of alternator (4) with alternator support (17) and secure with nut (16) and capscrew (15). Torque nut (16) and capscrew (15) to 57 lb. ft. If necessary, loosen capscrew (19) to permit alignment of lower mounting hole of alternator (4) and alternator brace (14). b. Align lower mounting hole of alternator (4) with alternator brace (14) and secure with two new starwashers (13) and capscrew (12) l Torque capscrew (12) to between 60 and 70 lb. ft. c. If necessary, torque capscrew (19) to 32 lb. ft. 8-5