TM10-3930-660-20 7-3. RADIATOR -  SERVICE/REPLACE/TEST (Cont’d) 8. 9. REMOVE CAPSCREW (38) , WASHER (39) , AND LOCKNUT  (40)  SECURING  BRACKET (41)  TO RADIATOR SHROUD (28). LEAVE RUBBER BUSHING (42) INSTALLED TO BRACKET (41).  DISCARD  LOCKNUT  (40). REMOVE RADDIATOR (2) FROM ENGINE COMPARTMENT. a. Have an assistant support the radiator  (2). Studs (43) may unscrew from radiator (2) as nuts (44) are removed. b. c. d. Remove two locknuts (44) and two rebound washers (45) securing radiator (2) to radiator supprt (46).  Discard  locknuts  (41). Remove radiator (2) from engine compartment. If necessary, remove two rubber mounts (47) from radiator (2). 10. IF NECESSARY, REMOVE RADIATOR SHROUD (28)  FROM  RADIATOR  (2)0 a. Remove eight capscrews (48), securing radiator shroud (28) to radiator  (2). b. Remove shroud (28) from radiator (2). 11. IF NECESSARY, REMOVE OVERFLOW HOSE (8) FROM RADIATOR (2). RADIATOR  INSTALLATION 1. IF REMOVED, INSTALL OVERFLOW HOSE (8) TO RADIATOR (2). 2. IF REMOVED, INSTALL RADIATOR SHROUD (28) TO RADIATOR (2). 7-9